Watch Safe with Genuine Leather Finish (Orange Leather)

Security Safe with Watch Winding Option, Jewelry Compartment, Digital Code Lock and Alarm System

Watch winder safe description:
Body material: Steel;
Exterior finish: Genuine leather;
Interior lining: Faux leather;
Maximum watch case diameter: 2.3 inches (60 mm);
Turns-Per-Day range: 650 to 1950 TPD;
Warranty: 1 year;
AC power adapter included (100-240V, 50-60Hz).

The safe-box is made of solid steel. The door has four locking bolts, hidden hinges and is equipped with a digital lock. The access code must be entered before the door can be opened with a key.
The safe has a built-in alarm system. The alarm is disarmed automatically, if the safe is opened in the usual way. Built-in motion sensor activates the siren if somebody tries to move the safe.
The digital lock and the alarm system are battery powered. The batteries are installed behind the door. The alarm can't be deactivated by disconnecting the AC power supply.

Three rotation directions are available: clockwise, counterclockwise and bi-directional (mixed). In mixed mode, the rotor rotates clockwise and counterclockwise alternately.

Each pair of winding rotors is controlled by two selector knobs. The first knob defines the rotating direction. Three rotation directions are available: clockwise, counterclockwise and bi-directional (mixed). In mixed mode, the rotor rotates clockwise and counterclockwise alternately.
The second knob sets the number of Turns-Per-Day. 5 TPD settings are available: 650, 750, 850, 1000 and 1950 TPD. Jewelry storage drawers have 14 lines for rings, earrings or cufflinks and 2 special earrings holders. The safe box has 3 multi-purpose compartments.

LED backlight is activated automatically after the door is opened.

Product features:

• Alarm system;
• Motion sensor;
• Digital security lock;
• 2 jewelry storage drawers;
• 3 large multi-purpose compartments;
• LED interior light;
• Soft polyurethane watch holders;
• 4 winder rotors;
• 3 winding directions;
• 15 winding programs;

Product dimensions (W x L x H): 12.5" x 16" x 18" (32 cm x 40.5 cm x 46 cm)
Product weight: 114.6 lbs (52 kg)

Keep your watch wound!

A watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. The reserve depends on the watch brand and on movement (caliber) used.

When your timepiece stops, you must reset time and wind up your watch. If it has additional functions (like date, moon-phase display, perpetual calendar), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can keep your timepiece wound and ready to go!

Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by an automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because their watch mechanism is different from the traditional one.
The watches shown in the pictures are not included.

Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your owner's manual or contact your watch brand's customer service for detailed information.
You can also refer to our watch winding parameters table.